KT-M150D
Heavy-duty two-post design provides stable, symmetrical lifting for a wide range of vehicles. Rated for 15,000 lb capacity with a max lifting height of 72.83 in, it supports light trucks and large SUVs. Direct-drive hydraulic system delivers consistent, low-maintenance operation and efficient load handling. Single-point lock release enables fast, synchronized lowering for safe service procedures. 220V 60Hz 3 kW (4 HP) power unit offers ample torque for frequent shop use. Constructed from heavy-gauge steel and reinforced posts for long service life (estimated). Symmetric arm configuration simplifies vehicle centering and axle work without complex repositioning. Installation requires a minimum 5.9 in thick, 3000 PSI concrete pad and professional anchoring to meet safety parameters. Service technicians benefit from clear arm reach and robust locking increments for routine maintenance tasks. Documentation and basic installation hardware are provided to assist with shop integration.
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
Features
- 15,000 lbs lifting capacity.
- Max lifting height of 72.83".
- Direct drive.
- Symmetric.
- Single point lock release.
-
220V 60Hz 3KW 4HP
Specifications
| Lifting capacity | 15,000 lb |
| Maximum lifting height | 72.83 in |
| Drive type | Direct drive hydraulic |
| Motor / Power | 220V 60Hz, 3 kW (4 HP) |
| Locking mechanism | Single-point lock release |
| Symmetry | Symmetric |
| Construction material | Heavy-gauge steel (estimated) |
| Concrete requirement | Minimum 5.9 in thickness, 3000 PSI concrete |
| Installation notes | Floor-mounted with anchor bolts; professional installation recommended (estimated) |
| Included components | Two posts, two lifting arms, hydraulic power unit, basic installation hardware and manual (estimated) |
Shipping Coverage
- Freight shipping only within the lower 48 states.
- Fulfillment times are 6-10 business days.
- Free shipping applies to: Tire Changers, Tire Balancers, Shop Tool Equipment, and Scissor Lifts → delivered to commercial addresses or the nearest carrier terminal.
- Two-Post and Four-Post Lifts: Customer must provide a forklift for unloading (if no forklift is available please reach out to customer service as there may be more charges involved). Please make sure to select the correct shipped or pick up option BEFORE ADDING THE ITEM TO YOUR CART. If no forklift is available, we can arrange terminal delivery for pick-up instead
Additional Services & Fees
- Residential Delivery: $100
- Liftgate Service: $100 (not available for two post, four posts, and select scissor lifts; contact us to confirm before ordering)
Customer Responsibilities
- Customers are responsible for unloading freight from the truck.
- A forklift or unloading dock service is strongly recommended.
- Customers are responsible for any re-delivery fees if the carrier cannot complete delivery.
- Do not sign for damaged or incomplete shipments. Contact Customer Service immediately if items are missing or damaged.
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Heavy-duty two-post design provides stable, symmetrical lifting for a wide range of vehicles. Rated for 15,000 lb capacity with a max lifting height of 72.83 in, it supports light trucks and large SUVs. Direct-drive hydraulic system delivers consistent, low-maintenance operation and efficient load handling. Single-point lock release enables fast, synchronized lowering for safe service procedures. 220V 60Hz 3 kW (4 HP) power unit offers ample torque for frequent shop use. Constructed from heavy-gauge steel and reinforced posts for long service life (estimated). Symmetric arm configuration simplifies vehicle centering and axle work without complex repositioning. Installation requires a minimum 5.9 in thick, 3000 PSI concrete pad and professional anchoring to meet safety parameters. Service technicians benefit from clear arm reach and robust locking increments for routine maintenance tasks. Documentation and basic installation hardware are provided to assist with shop integration.
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
Features
- 15,000 lbs lifting capacity.
- Max lifting height of 72.83".
- Direct drive.
- Symmetric.
- Single point lock release.
-
220V 60Hz 3KW 4HP
Specifications
| Lifting capacity | 15,000 lb |
| Maximum lifting height | 72.83 in |
| Drive type | Direct drive hydraulic |
| Motor / Power | 220V 60Hz, 3 kW (4 HP) |
| Locking mechanism | Single-point lock release |
| Symmetry | Symmetric |
| Construction material | Heavy-gauge steel (estimated) |
| Concrete requirement | Minimum 5.9 in thickness, 3000 PSI concrete |
| Installation notes | Floor-mounted with anchor bolts; professional installation recommended (estimated) |
| Included components | Two posts, two lifting arms, hydraulic power unit, basic installation hardware and manual (estimated) |
Shipping Coverage
- Freight shipping only within the lower 48 states.
- Fulfillment times are 6-10 business days.
- Free shipping applies to: Tire Changers, Tire Balancers, Shop Tool Equipment, and Scissor Lifts → delivered to commercial addresses or the nearest carrier terminal.
- Two-Post and Four-Post Lifts: Customer must provide a forklift for unloading (if no forklift is available please reach out to customer service as there may be more charges involved). Please make sure to select the correct shipped or pick up option BEFORE ADDING THE ITEM TO YOUR CART. If no forklift is available, we can arrange terminal delivery for pick-up instead
Additional Services & Fees
- Residential Delivery: $100
- Liftgate Service: $100 (not available for two post, four posts, and select scissor lifts; contact us to confirm before ordering)
Customer Responsibilities
- Customers are responsible for unloading freight from the truck.
- A forklift or unloading dock service is strongly recommended.
- Customers are responsible for any re-delivery fees if the carrier cannot complete delivery.
- Do not sign for damaged or incomplete shipments. Contact Customer Service immediately if items are missing or damaged.
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Related Products
Recently Viewed Products
