KT-B750
Automatic measurement captures A and D values for rapid wheel data input. A 3 mm steel welded chassis and hardened φ36 mm shaft provide structural stability and reduced vibration. An integrated pressure sensor with reinforced 8 mm mounting plates stabilizes the sensor platform for consistent readings. High-quality motor with pure copper winding improves torque delivery and heat dissipation for continuous shop use. Multiple balance modes and selectable units support precise balancing across rim profiles and measurement systems. Built-in fault diagnosis and dual-side self-calibration reduce setup time and maintain repeatable accuracy. Typical balance cycle completes in approximately seven seconds at a 180 rpm spin speed. Equipment accepts rims up to 30 inches, centers up to 5.31 inches, and supports wheel widths up to 15 inches. Designed for 110 V single-phase power with a 0.25 kW drive suitable for standard garage electrical setups. Suited for professional tire shops that need reliable, serviceable balancing without added electronic complexity.
Features
- Automatic measurement ruler for auto input A and D values
- The body use 3mm thickness steel, high strength, solid welding, few vibration
- All-in-one pressure sensor support design, bottom board thickness 8mm,side board thickness 8mm, that insure the sensor working stable and high precision
- Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life
- The 36mm shaft thread is by quenching treatment, high strength
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life
- Various balance mode, according different rim for different balance mode, make the balance effect more precision
- Built-in fault diagnosis and self calibration program that double side calibration ,No memory parameters, operation more easy
- Unit selection(Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Composite slash guard included
- Longer shaft for more width wheels
Specifications
| Body material | Steel welded body, 0.12 in thickness |
| Sensor mounting | Reinforced mounting plates 0.31 in thickness for stable sensor operation |
| Shaft diameter | 1.42 in hardened shaft (φ36 mm) |
| Rim capacity | Supports rims up to 30 in diameter |
| Wheel width capacity | Accepts wheel widths up to 15 in |
| Wheel diameter capacity | Up to 34.6 in overall wheel diameter |
| Max wheel weight capacity | Supports wheel weight up to 143.3 lb |
| Balancing performance | Balancing speed 180 rpm; balancing accuracy ±1 g; measuring time ~7 s |
| Power & motor | 110 V single-phase supply; motor power 0.25 kW |
| Controls & features | Automatic A/D input, multiple balance modes, unit selection (oz/g, mm/in), fault diagnosis and self-calibration |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Resources
For more detailed information and guidance, you can download the following:
Automatic measurement captures A and D values for rapid wheel data input. A 3 mm steel welded chassis and hardened φ36 mm shaft provide structural stability and reduced vibration. An integrated pressure sensor with reinforced 8 mm mounting plates stabilizes the sensor platform for consistent readings. High-quality motor with pure copper winding improves torque delivery and heat dissipation for continuous shop use. Multiple balance modes and selectable units support precise balancing across rim profiles and measurement systems. Built-in fault diagnosis and dual-side self-calibration reduce setup time and maintain repeatable accuracy. Typical balance cycle completes in approximately seven seconds at a 180 rpm spin speed. Equipment accepts rims up to 30 inches, centers up to 5.31 inches, and supports wheel widths up to 15 inches. Designed for 110 V single-phase power with a 0.25 kW drive suitable for standard garage electrical setups. Suited for professional tire shops that need reliable, serviceable balancing without added electronic complexity.
Features
- Automatic measurement ruler for auto input A and D values
- The body use 3mm thickness steel, high strength, solid welding, few vibration
- All-in-one pressure sensor support design, bottom board thickness 8mm,side board thickness 8mm, that insure the sensor working stable and high precision
- Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life
- The 36mm shaft thread is by quenching treatment, high strength
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life
- Various balance mode, according different rim for different balance mode, make the balance effect more precision
- Built-in fault diagnosis and self calibration program that double side calibration ,No memory parameters, operation more easy
- Unit selection(Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Composite slash guard included
- Longer shaft for more width wheels
Specifications
| Body material | Steel welded body, 0.12 in thickness |
| Sensor mounting | Reinforced mounting plates 0.31 in thickness for stable sensor operation |
| Shaft diameter | 1.42 in hardened shaft (φ36 mm) |
| Rim capacity | Supports rims up to 30 in diameter |
| Wheel width capacity | Accepts wheel widths up to 15 in |
| Wheel diameter capacity | Up to 34.6 in overall wheel diameter |
| Max wheel weight capacity | Supports wheel weight up to 143.3 lb |
| Balancing performance | Balancing speed 180 rpm; balancing accuracy ±1 g; measuring time ~7 s |
| Power & motor | 110 V single-phase supply; motor power 0.25 kW |
| Controls & features | Automatic A/D input, multiple balance modes, unit selection (oz/g, mm/in), fault diagnosis and self-calibration |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Resources
For more detailed information and guidance, you can download the following:
Related Products
Recently Viewed Products
